RTI PIKO 34 RYGB

RTI PIKO Fl
The highly powerful RTI PIKO 34 RYGB is suitable for large and demanding indoor and outdoor applications.
Equipped with the latest RSL Semiconductor modules combined with a yellow OPSL, the RTI PIKO 34 RYGB has extraordinary good beam specifications, enhanced visibility and great white balance.
This laser system is made for top professional multimedia shows, installation projects and advanced projections.
Quality made in Germany!
Incl. waterproof flightcase
  • 34'000 mW guaranteed power
  • Advanced RSL Semiconductor modules for extremely good beam shape and low divergence, which is equal on x- and y-axis, combined with OPSL
  • Addition of high visibility 577nm yellow OPSL
  • Extremely sharp intense beams especially compared to other lasers of this power
  • Integrated powerful mainboard with advanced configuration features (geo-correction, zone setup, color balancing, etc.) and DAC feature
  • Integrated network switch for linking the control signal
  • Integrated Touch-Display for adjustment of basic functions
  • Rugged tour grade housing
  • 360° Bracket with quick-lock system
  • Incl. waterproof flightcase

Carte mère ShowNET < par défaut :
  • Diverses options de contrôle : ILDA, DMX et ArtNET professionnel (deux modes), LAN (contrôle par ordinateur, DAC intégré), Fonctionnement autonome, Récepteur de flux ILDA, Maître-Esclave
  • Créer du contenu personnalisé, le stocker à l'intérieur du laser et l'afficher dans différents modes
  • Logiciel de contrôle Show Laser gratuit inclus
RTI PIKO Fl
RTI PIKO F
RTI PIKO Fr
RTI PIKO B
RTI PIKO L
RTI PIKO Fc
Stand-Alone modeMODE AUTONOME:
Le laser fonctionne de manière autonome et n'a pas besoin d'être contrôlé séparément. Il lit le contenu stocké sur la carte mère du laser.
DMX modeMODE DMX:
Le laser peut être contrôlé avec un contrôleur DMX standard ou un logiciel DMX.
ArtNET modeMode de contrôle ArtNET
Master-Slave modeMode maître-esclave:<
Un laser envoie des commandes de contrôle, l'autre laser les exécute. Fonctionne avec les modes autonome et musical.
LAN connectionMODE LAN:
Le laser peut être contrôlé via réseau / LAN - il peut s'agir soit d'un contrôle logiciel direct, soit d'ArtNET ou d'un système similaire (selon la carte mère)
ILDA connectionMODE ILDA:
Le laser peut être contrôlé par un signal ILDA standard (le signal de contrôle analogique pour le contrôle du laser). Des convertisseurs analogique-numérique externes (DAC) peuvent être utilisés.
ILDA StreamingStreaming ILDA
ShowNET insideSHOWNET INSIDE:<
Le laser est équipé de la carte mère laser avancée ShowNET qui apporte une multitude de fonctionnalités au laser et en fait un dispositif d'éclairage intelligent.
Free Showeditor laser software includedSHOWEDITOR INCLUS:<
La version complète du logiciel de contrôle laser Showeditor est incluse avec la carte mère ShowNET.
EN SAVOIR PLUS SUR LE PRODUIT
Built with the latest RTI Semiconductor Laser Module technology and an extra-visible yellow OPSL head!

The RTI PIKO 34 RYGB is made in Germany and is a powerful show laser system with extremely good visibility that is ideally suited for top professional laser show applications of any kind. It is built with the latest RTI semiconductor laser modules that are specially designed in a way to keep spot size as well as divergence equal on both x- and y-axis. This is significantly advantageous over solutions with a very good divergence on one axis, but a bad divergence on the other. The laser modules inside the RTI PIKO 34 RYGB are different - the spot size and shape is equal for all colors and on both axis!
The color range is extended with a yellow Coherent Taipan OPSL module for increased visibility - and matching spot size.

The beam specifications of the RTI PIKO 34 RYGB are given with only ca. 5.0 mm diameter and 0.7 mrad divergence - which applies to both axis, so it’s an actual value not an average and provides higher quality results than specifications with mixed calculations. The extremely small beam diameter allows for the use of very small mirrors, which results in reduced inertia and thus very good scanning performance.

KEY FEATURES

  • 34'000 mW total RYGB power in a small housing of only 271 x 491 x 296 mm
  • super small spot of ca. 5.0 mm for reduced inertia and thus fast scanning
  • 6'000 mW / 577 nm yellow Coherent Taipan OPSL module for increased visibility
  • All wavelengths matched in divergence and beam size
  • extremely low divergence of 0.7 mrad - on both axis!
  • Compact form factor, RSL module size equal to the Coherent OPSL modules
  • extremely lightweight unit with only 27 kg
  • Different, brighter wavelengths for increased visibility
  • brilliant colors and great color fading
  • RTI Semiconductor Laser Modules match up with the added Yellow OPSL in spot size and divergence
  • Laser modules do not come out of internal alignment
  • Maintenance free laser modules
  • Integrated network switch, control signal can easily be linked through
  • Interlock / e-stop signal can be daisy-chained
  • High quality product, made in Germany
  • Great scanning performance suitable for projections as well as for beams

The RTI PIKO 34 RYGB impresses with a guaranteed RYGB output power of 34'000 mW. Great visibility is achieved with the new RTI Semiconductor Laser Modules (RSL) with special wavelengths for increased visibility: 8'000 mW / 637 nm for a very bright red combined with 9'000 mW / 525 nm green and a strong blue laser module with 15'000 mW / 455 nm. An additional yellow Coherent Taipan OPSL head with 6'000 mW / 577 nm is added for significantly increased visibility - yellow is the best visible color to human eye. The 525 nm green provides a warmer green tone than the 520 nm diodes and also has increased visibility.
These new RSL modules with their extremely low divergence and homogenous beam shape make the RTI PIKO 34 RYGB a top professional laser system. The extremely small beam diameter of only ca. 5.0 mm allows for the use of small scanner mirrors which leads to reduced inertia and higher scan speeds. This is especially important, as the RTI PIKO 34 RYGB can be used for any kind of laser show application: Super sharp beams and vivid colors for large scale concerts and festivals but also a perfectly matched beam for crisp graphics.

Beam Spot Comparison RTI PIKO 34 RYGB

The RTI Semiconductor Laser Modules are maintenance free and do not come out of internal alignment.
The standard scanners can be run at a maximum of and a maximum scan angle of 50°. CT-6210 scanners with LAS Turboscan drivers are available as option and provide even higher scan speeds with up to 60 kpps at ILDA 8°.

The housing is built very durable and ideal for use on the road. The new 360° brackets can be safely fixed in the needed position in just a few moments thanks to the quick-lock system. It has an interlock / e-stop through port, which allows for daisy-chaining the interlock signal, which means that only one e-stop is required for several laser systems. Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications. Control signals can be looped through directly via the network switch, which is also integrated.

The powerful RTI PIKO 34 RYGB is suitable for indoor and outdoor show laser applications at concerts, festivals and other huge events. Demanding graphics projections or projections over long distances are possible without any problems, due to the extremely good divergence.

INCLUDING SHOWNET LASER MAINBOARD

The RTI PIKO 34 RYGB is delivered with a ShowNET laser mainboard as standard. This means it has a multitude of control features already built-in: Control via DMX or ArtNET, just like a normal lighting fixture, are possible as well as computer control via ILDA or LAN. Of course the laser can be run in stand alone operation, too. The contents for playback (for DMX, ArtNet, Stand-Alone, etc.) can be fully customized. As the ShowNET laser mainboard comes with a full license of the Showeditor software, it is easy to create custom content for the built-in memory or even directly control the laser with a computer - either live or for creation an playback of complete laser shows.

If ILDA shall be used as control option, like from an external Lasergraph DSP, the internal ShowNET mainboard can also be used as receiver for an IDLA streaming signal - so the externbal ILDA signal can be feeded to an external ShowNET device and this sends the direct control to the RTI PIKO 34 RYGB via ILDA Streaming - so no long ILDA cables are required any more, even with ILDA based control systems.
VOIR LES PHOTOS DE DÉTAIL
RTI PIKO B Detail 07
RTI PIKO B Detail 02
RTI PIKO B Detail 01
RTI PIKO B Detail 03
RTI PIKO B Detail 04
RTI PIKO B Detail 06
RTI PIKO B Detail 05
DÉTAILS TECHNIQUES
Puissance garantie en sortie
34'000 mW
Puissance rouge
8'000 mW / 637 nm
Puissance vert
9'000 mW / 525 nm
Puissance bleu
15'000 mW / 455 nm
Puissance jaune
6'000 mW / 577 nm
Caractéristiques de faisceaux (full angle)
ca. 5.0 mm / 0.7 mrad
Scanners
45 kpps@8° ILDA; optional CT-6210 with LAS Turboscan: 60 kpps@8° ILDA, max. 60°
Angle de balayage max.
50°
Sources laser
RSL modules, Coherent Taipan OPSL
Classe laser
4
Modes de fonctionnement
ILDA, LAN (Software), DMX, ArtNET, ILDA-Streaming, Stand-Alone; (integrated intelligent ShowNET laser mainboard with display)
Motifs de base
over 120 (layers, tunnels, fences, waves, etc.)
Accessoires
Incl. waterproof flightcase, interlock connector, key, power cable, manual,; full version Showeditor software license included
Indice IP
IP51
Alimentation
85-250 V AC 50/60 Hz
Consommation électrique
850 W
Dimensions
271 x 491 x 296 mm
Poids
27 kg
EAN / MPN
7640144999360
*En raison de différentes technologies avancées de correction d‘optiques utilisées dans nos systèmes, les puissances en sortie des modules peuvent légèrement différer des puissances annoncées pour le module correspondant.
 

Marques Distribuées:

Marque distribuée LaserworldMarque distribuée tarmMarque distribuée Ray Technologies
Marque distribuée Laserworld ShoweditorMarque distribuée ShowcontrollerMarque distribuée PangolinMarque distribuée coherent