The powerful but compact RTI PIKO 36G OPSL is suitable for outdoor laser show applications at concerts, festivals, and other huge events with easy operation due to the built-in software and DMX control. The PIKO is equipped with the latest green Coherent Taipan OPSL modules making it an amazing laser for beam shows and demanding graphic projections such as laser mapping or projections over long distances. The high-end performance is part of the PIKO's DNA and makes this possible due to the great performance of the Coherent Taipan OPSL modules.
Incl. waterproof flightcase
  • 36 W guaranteed power
  • Coherent Taipan OPSL green
  • Maintenance free laser system
  • Coherent Taipan OPSL modules with no color misalignment
  • New advanced sealed optical section with no color misalignment
  • Complex graphics capable - 45 kpps@8° ILDA scanners – upgradable to 60kpps
  • Extremely sharp intense beams - low divergence
  • Multi-control mainboard for DMX, ArtNET, LAN, ILDA, ILDA streaming and stand-alone operation
  • Digital display for easy mode selection
  • Integrated network switch for linking the control signal
  • FB4-QS MAX optional integration
  • Rugged tour-grade compact housing
  • Laser Artists' choice
  • Lighting Designers' choice
  • Incl. waterproof flightcase

Carte mère ShowNET < par défaut :
  • Diverses options de contrôle : ILDA, DMX et ArtNET professionnel (deux modes), LAN (contrôle par ordinateur, DAC intégré), Fonctionnement autonome, Récepteur de flux ILDA, Maître-Esclave
  • Créer du contenu personnalisé, le stocker à l'intérieur du laser et l'afficher dans différents modes
  • Logiciel de contrôle Show Laser gratuit inclus
Stand-Alone modeMODE AUTONOME:
Le laser fonctionne de manière autonome et n'a pas besoin d'être contrôlé séparément. Il lit le contenu stocké sur la carte mère du laser.
Le laser peut être contrôlé avec un contrôleur DMX standard ou un logiciel DMX.
ArtNET modeMode de contrôle ArtNET
Master-Slave modeMode maître-esclave:<
Un laser envoie des commandes de contrôle, l'autre laser les exécute. Fonctionne avec les modes autonome et musical.
LAN connectionMODE LAN:
Le laser peut être contrôlé via réseau / LAN - il peut s'agir soit d'un contrôle logiciel direct, soit d'ArtNET ou d'un système similaire (selon la carte mère)
ILDA connectionMODE ILDA:
Le laser peut être contrôlé par un signal ILDA standard (le signal de contrôle analogique pour le contrôle du laser). Des convertisseurs analogique-numérique externes (DAC) peuvent être utilisés.
ILDA StreamingStreaming ILDA
Le laser est équipé de la carte mère laser avancée ShowNET qui apporte une multitude de fonctionnalités au laser et en fait un dispositif d'éclairage intelligent.
Free Showeditor laser software includedSHOWEDITOR INCLUS:<
La version complète du logiciel de contrôle laser Showeditor est incluse avec la carte mère ShowNET.
Built with the green Coherent Taipan OPSL modules!

The RTI PIKO 36G OPSL is made in Germany and is a compact show laser system in a rugged, dust-proof housing that is ideally suited for top professional laser show applications of any kind.

The beam specifications of the new RTI PIKO 36G OPSL are given with only ca. 5.0 mm diameter and 0.8 mrad divergence. The extremely small beam diameter allows for the use of very small mirrors, which results in reduced inertia and thus very good scanning performance.


  • 36 W total power in a small housing of only 271 x 491 x 296 mm
  • super small spot of ca. 5.0 mm for reduced inertia and thus fast scanning
  • extremely low divergence of less than 0.8 mrad
  • Integrated network switch for linking the control signal
  • Compact form factor
  • extremely lightweight unit with only 27 kg
  • Different, brighter wavelengths for increased visibility
  • green color and great color fading
  • Laser modules do not come out of internal alignment
  • Maintenance free laser modules
  • Interlock / e-stop signal can be daisy-chained
  • High quality product, made in Germany
  • Great scanning performance suitable for projections as well as for beams

The RTI PIKO 36G OPSL impresses with a guaranteed output power of 36'000 mW. Great visibility is achieved with the Coherent OPSL Taipan: The 4x 10'000 mW / 530 nm Coherent Taipan OPSL green provides a warmer green tone than the 520 nm diodes and has increased visibility.
These OPSL modules with their extremely low divergence make the RTI PIKO 36G OPSL a top professional laser system. The extremely small beam diameter of only ca. 5.0 mm allows for the use of small scanner mirrors which leads to reduced inertia and higher scan speeds. This is especially important, as the RTI PIKO 36G OPSL can be used for any kind of laser show application: Super sharp beams and vivid green color for large scale concerts and festivals but also a perfectly matched beam for crisp graphics.

The standard scanners can be run at a maximum of 45 kpps@8° ILDA and a maximum scan angle of 50°. CT-6210 scanners with LAS Turboscan drivers are available as option and provide even higher scan speeds with up to 60kpps at ILDA 8°.

The housing is built very durable and ideal for use on the road. It has an interlock / e-stop through port, which allows for daisy-chaining the interlock signal, which means that only one e-stop is required for several laser systems. Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications.

The powerful RTI PIKO 36G OPSL is suitable for indoor and outdoor show laser applications at concerts, festivals and other huge events. Demanding graphics projections or projections over long distances are possible without any problems, due to the extremely good divergence.


The RTI PIKO 36G OPSL is delivered with a ShowNET laser mainboard as standard. This means it has a multitude of control features already built-in: Control via DMX or ArtNET, just like a normal lighting fixture, are possible as well as computer control via ILDA or LAN. Of course the laser can be run in stand alone operation, too. The contents for playback (for DMX, ArtNet, Stand-Alone, etc.) can be fully customized. As the ShowNET laser mainboard comes with a full license of the Showeditor software, it is easy to create custom content for the built-in memory or even directly control the laser with a computer - either live or for creation an playback of complete laser shows.

If ILDA shall be used as control option, like from an external Lasergraph DSP, the internal ShowNET mainboard can also be used as receiver for an ILDA streaming signal - so the externbal ILDA signal can be feeded to an external ShowNET device and this sends the direct control to the RTI PIKO 36G OPSL via ILDA Streaming - so no long ILDA cables are required any more, even with ILDA based control systems.
RTI PIKO B Detail 07
RTI PIKO B Detail 04
RTI PIKO B Detail 03
RTI PIKO B Detail 05
RTI PIKO B Detail 06
RTI PIKO B Detail 02
RTI PIKO B Detail 01
Puissance garantie en sortie
36'000 mW
Puissance vert
4x 10'000 mW / 530 nm
Caractéristiques de faisceaux (full angle)
ca. 5.0 mm / 0.8 mrad
45 kpps@8° ILDA; en option: CT-6210 avec driver LAS Turboscan, >60kpps@8° ILDA, max. 60°
Angle de balayage max.
Sources laser
Coherent Taipan OPSL
Classe laser
Modes de fonctionnement
ILDA, DMX, LAN, ArtNet, streaming ILDA, carte SD intégrée, mode autonome
Motifs de base
env. 120 effets (tunnel, vague, dents de scie, etc.)
connecteur interlock, clé, câble d'alimentation, mode d'emploi, licence logiciel Showeditor
Indice IP
85-250 V AC 50/60 Hz
Consommation électrique
900 W
271 x 491 x 296 mm
27 kg
*En raison de différentes technologies avancées de correction d‘optiques utilisées dans nos systèmes, les puissances en sortie des modules peuvent légèrement différer des puissances annoncées pour le module correspondant.

Marques Distribuées:

Marque distribuée LaserworldMarque distribuée tarmMarque distribuée Ray Technologies
Marque distribuée Laserworld ShoweditorMarque distribuée ShowcontrollerMarque distribuée PangolinMarque distribuée coherent