tarm 12G OUTDOOR

Single green outdoor laser, perfectly suitable for fixed installations for advertising, mappings or any kind of graphics projections. The high quality beam with uniform beam profile, due to the full equipment with the high performance RSL modules of the second generation, combined with the fast scanning and upgrade option to CT-6210, makes the tarm 12G OUTDOOR an awsome projection unit.
IP65 waterproof laser system, suitable for outdoor use and fixed installations.
  • IP65 waterproof housing
  • 11'000 mW guaranteed power
  • Complex graphics capable - 45 kpps@8° ILDA scanners – upgradable to 60kpps
  • Extremely sharp intense beams - low divergence of <0.8 mrad
  • Integrated powerful mainboard with advanced configuration features (geo-correction, zone setup, color balancing, etc.) and DAC feature
  • Control screen (internal) for convenient mode selection
  • Laser Artists' choice
  • Lighting Designers' choice

Carte mère ShowNET par défaut :
  • Diverses options de contrôle : Art-Net professionnel (deux modes), Fonctionnement autonome, Récepteur de flux ILDA, LAN (contrôle par ordinateur, DAC intégré)
  • Créer du contenu personnalisé, le stocker à l'intérieur du laser et l'afficher dans différents modes
  • Logiciel de contrôle Show Laser gratuit inclus
Stand-Alone modeMODE AUTONOME:
Le laser fonctionne de manière autonome et n'a pas besoin d'être contrôlé séparément. Il lit le contenu stocké sur la carte mère du laser.
ArtNET modeMode de contrôle ArtNET
LAN connectionMODE LAN:
Le laser peut être contrôlé via réseau / LAN - il peut s'agir soit d'un contrôle logiciel direct, soit d'ArtNET ou d'un système similaire (selon la carte mère)
ILDA StreamingStreaming ILDA
Le laser est équipé de la carte mère laser avancée ShowNET qui apporte une multitude de fonctionnalités au laser et en fait un dispositif d'éclairage intelligent.
Free Showeditor laser software includedSHOWEDITOR INCLUS:<
La version complète du logiciel de contrôle laser Showeditor est incluse avec la carte mère ShowNET.
Built with the latest RTI Semiconductor Laser Module technology!

The tarm 12G OUTDOOR are especially designed for outdoor laser installations. They come equipped with the top quality laser setup known from the standard tarm units, but have a waterproof enclosure that not only protects the components inside from water, but also shields off direct heat from solar exposure. A specially designed roof in front of the output window prevents it from getting impacted by direct rain.
To cope with varying temperatures, the tarm OUTDOOR units are equipped with an active watercooling system, that is built into the housing. An active heating system helps to keep the laser systems operational even at low temperatures. Thus the tarm 12G OUTDOOR lasers can be used at environmental temperatures between -10°C and +45°C. A CT Scanner upgrade with LAS Turboscan drivers is available for the tarm 12G OUTDOOR to achieve top end quality graphics results.

The tarm 12G OUTDOOR is made in Germany and is a compact show laser system that is ideally suited for top professional laser show applications of any kind. It is built with the latest RTI semiconductor laser modules that are specially designed in a way to keep spot size as well as divergence equal on both x- and y-axis. This is significantly advantageous over solutions with a very good divergence on one axis, but a bad divergence on the other. The laser modules inside the tarm 12G OUTDOOR are different - the spot size and shape is equal on both axis!

The beam specifications of the new tarm 12G OUTDOOR are given with only ca. 5.0 mm diameter and <0.8 mrad divergence - which applies to both axis. The extremely small beam diameter allows for the use of very small mirrors, which results in reduced inertia and thus very good scanning performance.


  • 11 W total power in a small housing of only 800/370/260 mm
  • super small spot of ca. 5.0 mm for reduced inertia and thus fast scanning
  • extremely low divergence of <0.8 mrad - on both axis!
  • Laser modules do not come out of internal alignment
  • Maintenance free laser modules
  • High quality product, Made in Germany
  • Great scanning performance suitable for projections as well as for beams

The tarm 12G OUTDOOR impresses with a guaranteed RGB output power of 11'000 mW. Great visibility is achieved with the new RTI Semiconductor Laser modules (RSL): 13'000 mW / 525 nm green laser module. The 525nm green provides a warmer green tone than the 520nm diodes and has increased visibility.
These new RSL modules with their extremely low divergence and homogenous beam shape make the tarm 12G OUTDOOR a top professional laser system. The extremely small beam diameter of only ca. 5.0 mm allows for the use of small scanner mirrors which leads to reduced inertia and higher scan speeds. This is especially important, as the tarm 12G OUTDOOR can be used for any kind of laser show application: Super sharp beams and strong green for installation projects and multimedia, especially for crisp graphics.

The RTI Semiconductor Laser modules are maintenance free and do not come out of internal alignment.
The standard scanners can be run at a maximum of 45 kpps@8° ILDA and a maximum scan angle of 50°. CT-6210 scanners with LAS Turboscan drivers are available as option and provide even higher scan speeds with up to 60kpps at 8° ILDA .

Demanding graphics projections or projections over long distances are possible without any problems, due to the extremely good divergence.


The tarm 12G OUTDOOR is delivered with a ShowNET laser mainboard as standard. This means it has a multitude of control features already built-in: Control via ArtNET, just like a normal lighting fixture, are possible as well as computer control via ILDA or LAN. Of course the laser can be run in stand alone operation, too. The contents for playback (for ArtNet, Stand-Alone, etc.) can be fully customized. As the ShowNET laser mainboard comes with a full license of the Showeditor software, it is easy to create custom content for the built-in memory or even directly control the laser with a computer - either live or for creation an playback of complete laser shows.

If ILDA shall be used as control option, like from an external Lasergraph DSP, the internal ShowNET mainboard can also be used as receiver for an ILDA streaming signal - so the external ILDA signal can be feeded to an external ShowNET device and this sends the direct control to the tarm 12G OUTDOOR via ILDA Streaming - so no long ILDA cables are required any more, even with ILDA based control systems.


> Plus d'informations

Options de contrôle facultatives (modification nécessaire !):

Les options de contrôle facultatives nécessitent des modifications de la configuration générale du laser. D'autres modes de fonctionnement ou compatibilités peuvent être perdus.
Pangolin Logo
Pangolin Logo


> Plus d'informations

Tarm 11G OUTDOOR R S Detail
Tarm 11G OUTDOOR L S Detail


> Plus d'informations

Puissance garantie en sortie
11'000 mW
Puissance vert
13'000 mW / 525 nm
Caractéristiques de faisceaux*
ca. 5.0 mm / <0.8 mrad
45 kpps@8° ILDA; en option: CT-6210 avec driver LAS Turboscan, 60kpps@8° ILDA, max. 60°
Angle de balayage max.
Sources laser
module RSL
Classe laser
Modes de fonctionnement
ILDA, DMX, LAN, ArtNet, streaming ILDA, carte SD intégrée, mode autonome
Motifs de base
env. 120 effets (tunnel, vague, dents de scie, etc.)
flightcase, housse de pluie, connecteur interlock, clé, câble d'alimentation, mode d'emploi, licence logiciel Showeditor
Indice IP
85 V - 250 V / AC
Consommation électrique
400 W
800/370/260 mm
24.0 kg
*En raison de différentes technologies avancées de correction d‘optiques utilisées dans nos systèmes, les puissances en sortie des modules peuvent légèrement différer des puissances annoncées pour le module correspondant. Divergence FWHM moyen selon le modèle.


> Plus d'informations


Marques Distribuées:

Marque distribuée LaserworldMarque distribuée tarmMarque distribuée Ray Technologies
Marque distribuée Laserworld ShoweditorMarque distribuée ShowcontrollerMarque distribuée PangolinMarque distribuée coherent